HUSQVARNA® VIKING® Quilt Binder for IDF System
The HUSQVARNA® VIKING® Quilt Binder for IDF System is an advanced double-fold binding attachment designed to help you achieve clean, professional edges on your quilted projects in one seamless step. When used with the correct stitch plate (412964206 or 412964207) and the Quilt Binder Foot for IDF System (920568096), it automatically folds and stitches a 1/2″ (12 mm) binding onto your fabric. It’s ideal for finishing the edges of quilts, placemats, table runners, and other multi-layered fabric projects.
Compatible with HUSQVARNA® VIKING® machine groups: 8, 9
(When used with Quilt Binder Foot for IDF System)
Models include:
DESIGNER DIAMOND™ series
DESIGNER RUBY™ series
DESIGNER TOPAZ™ series
SAPPHIRE™ series
OPAL™ series
EDEN ROSE™ 250C
BRILLIANCE™ series
TRIBUTE™ 140C, 145C
DESIGNER SAPPHIRE™ 85
Key Features:
Designed for use with the IDF system for even feeding of fabric layers
Automatically folds and attaches a 1/2″ finished double-fold binding
Accommodates multiple quilt layers with ease
Ideal for professional quilt finishing and home décor projects
How to Use:
Attach the Interchangeable Dual Feed Foot or the Quilt Binder Foot for IDF System.
Set your machine to a straight stitch or hand-look quilt stitch.
Secure the attachment plate onto your machine’s stitch plate using the included thumb screw, aligning the rear pin with the top opening.
Mount the binder onto the attachment plate and secure with screws and washers.
Measure the total edge length of your project and add at least 6″ (15 cm).
Cut 1 3/4″ (45 mm) wide strips of lightweight woven fabric, join the strips, and taper the leading edge into a point.
Use tweezers to feed the strip (wrong side facing you) into the funnel of the binder.
When the strip exits the binder, hold it with your left hand and continue guiding it into the funnel to form a double fold.
Raise the presser foot, pull the strip under and behind the needle (approx. 2.5″).
Slide your quilt (right side up) into the binder slot.
Adjust needle position to align perfectly with the folded edge and begin stitching.
To Finish the Binding:
Sew around the project edge until the beginning and end of the binding nearly meet.
Trim excess from the starting edge, overlap the end, and continue stitching slightly beyond.
Remove the quilt from the binder, trim the tail to about 1″ (2.5 cm), fold the raw edge inward, pin, and stitch to secure.
Please mention your machine model in the order so we can send you the correct foot.
